Like us !
Follow us !
Follow us !
Subscribe us !
Connect us ! 
Refurbished LD-002R 3D Printer
Rs. 9,999
- Scratches on Body & Profile and Used Nozzle. LD-002R adopts the LCD selective area light transmission principle molding technology. The LD-002R 3D printer integrates many functional technologies in printing accuracy, printing speed and product functions, and has nine high-end configurations, making the new LD-002R available for more market choices
This Product is Out Of Stock......
Detail
| Technology : | LCD |
| Product Condition : | Refurbished |
| Printing Volume : | 120 x 65 x 165 mm |
| Light Source : | 405nm |
| XY-axis Resolution : | 0.075 mm |
| Z-axis Resolution : | NA |
| Layer Height : | 20 – 50 microns |
| Printing Speed : | 20-30mm/hr |
| Power : | 72W |
| Materials : | 405nm UV resin |
| Machine size : | 221 x 221 x 403 mm |
| Display : | 3.5 in touchscreen |
| Software : | ChiTu Box |
| Supported files : | STL |
| Connectivity : | USB Port |
| Machine weight : | 7kg |
| : |
- BUILD AND MOTION: Great emphasis is being placed on the LD-002R’s robust build quality and the components of its motion system, which is underpinned by a ball screw and single linear rail for the Z-axis.
- ANTI-ALIASING： MSLA 3D printers use an LCD screen to mask an image of a layer over a UV light source. Comprised of hundreds of thousands of pixels, each a little rectangle itself, this tech leaves a telltale sign of the edges of these pixels on the print surface. Often barely visible, this effect can be lessened through the use of a digital processing called anti-aliasing, which interpolates between these edges, smoothing the effect out.
- QUICK LEVELING： Quick leveling in the sense that the machine will lower the print plate to the vat for you, yes the LD-002R is quick leveling. Four hex screws feature on the print plate — loosen them before dropping the plate, and it will align to the level of the screen. Tighten and you’re good to go. Standard MSLA fare.
- PERFORATED PRINT PLATE： Something of an oddity on a small desktop MSLA machine, the Creality LD-002R 3d printer has a perforated print plate. Typically seen on larger bottom-up machines where larger prints present additional pull that might dislodge an improperly adhered print, it’s unusual, and perhaps even distracting overkill, to see it on a smaller machine. It’s not a bad thing, but it makes you wonder why they did it.
- AIR FILTER： A small box at the rear of the print chamber contains a pouch of activated carbon. This should help to remove part of the stench of exposed resin from the air.