eSUN PVA Filament -0.5KG
7,999
Taxes Included | Free Shipping
PVA is a water-soluble material that is often used as a support material with no need of adding any chemical and speicial treating. Leave the part in a warm water bath dissolve faster. After dissolution, there is no residue on the model surface with smoothy effect; it can be worked with PLA, TPU, PA(nylon) and other consumables materials to print extremely complex shapes or support materials with a partially closed cavity model. It’s also a good choice to work for multi-nozzle printers.
This Product is Out Of Stock......
- 3D PRINTING FILAMENT PVA
- Density(g/cm3) 1.25
- Heat Distortion Temp(℃,0.45MPa) /
- Melt Flow Index(g/10min) /
- Tensile Strength(MPa) 22
- Elongation at Break(%) 360
- Flexural Strength(MPa) /
- Flexural Modulus(MPa) /
- IZOD Impact Strength(kJ/㎡) /
- Durability 7/10
- Printability 5/10
- Recommended printing parameters
- Extruder Temperature(℃) 180 – 230℃
- Recommended temperature：190℃
- Bed temperature(℃) 45 – 60°C
- Fan Speed 100%
- Printing Speed 20 – 50mm/s
- Heated Bed Required
- Recommended Build Surfaces Masking paper, PEI
- Feature
- Flexible √
- Elastic ——
- Impact Resistant ——
- Soft √
- Composite ——
- UV Resistant ——
- Water Resistant ——
- Dissolvable √
- Heat Resistant ——
- Chemically Resistant ——
- Fatigue Resistant √
- Need drying √
- Heated Bed Required √
- Print recommend Drying at 45℃/>10h, Short-range extruder, slow printing
| 3D PRINTING FILAMENT PVA: | |
| Density(g/cm3) 1.25: | |
| Heat Distortion Temp(℃,0.45MPa) /: | |
| Melt Flow Index(g/10min) /: | |
| Tensile Strength(MPa) 22: | |
| Elongation at Break(%) 360: | |
| Flexural Strength(MPa) /: | |
| Flexural Modulus(MPa) /: | |
| IZOD Impact Strength(kJ/㎡) /: | |
| Durability 7/10: | |
| Printability 5/10: | |
| Recommended printing parameters: | |
| Extruder Temperature(℃) 180 – 230℃: | |
| Recommended temperature：190℃: | |
| Bed temperature(℃) 45 – 60°C: | |
| Fan Speed 100%: | |
| Printing Speed 20 – 50mm/s: | |
| Heated Bed Required: | |
| Recommended Build Surfaces Masking paper, PEI: | |
| Feature: | |
| Flexible √: | |
| Elastic ——: | |
| Impact Resistant ——: | |
| Soft √: | |
| Composite ——: | |
| UV Resistant ——: | |
| Water Resistant ——: | |
| Dissolvable √: | |
| Heat Resistant ——: | |
| Chemically Resistant ——: | |
| Fatigue Resistant √: | |
| Need drying √: | |
| Heated Bed Required √: | |
| Print recommend Drying at 45℃/>10h, Short-range extruder, slow printing: |
eSun
3D Filaments
Natural