Creality PLA White

Brand: Creality
SKU: 3IDEA-CREALITY-PLA-WHT

Rs. 1,447
    • Printing Temprature : 200°C
    • Creality PLA White is made of polylactic acid.
    • It is suitable for low-temperature printing and can be used in any project that requires an aesthetic finishing.
    • It easy to use and suitable to print models with fine details.

Detail

:
Material : CR-PLA
Dimension : 25.5CM*12CM*23CM
Density : 1.25±0.05g/gm³
Melt flow rate : 5-7g/min(190 degrees 2.16kg)
Water absorption : 0.5%
Tensile Strength : ≥60MPa
Flexural modulus : ≥60MPa
Elongation at break : ≥3.0%
Diameter : 1.75mm
Bubble : 100% no bubbles
Coil Diameter : 200mm
Coil Height : 66mm
Coil Inner Diameter : 56mm
Temperature : PLA no heated bed

  1.  Good Printing Effect
  2.  Dimensional Stability
  3.  Non-toxic
  4.  Wear Resistance, High Impact Strength
  5.  Tough hard
  6.  Eco-Friendly Filament
  7.  Smooth Printing
  8.  Good glossy surface
  9.  
  10.  

3.3

Average Rating

80%Recommended
0%
100%
0%
0%
0%
Login to Review