DentX 104 Skin
DentX 104 series is photopolymer resin series intended for Dental prototype 3D printing. The printed parts exhibit excellent structural and surface properties. Additionally, they are considerably easy to finish and polish using standard surface treatment methods. The rheology characteristics of DentX 104 series provides stable and consistent performance on most DLP and SLA 3D printing machines.
- Excellent hardness
- Excellent surface properties
- Excellent printability on most 3D printing machines
- Easy to finish and polish
- Excellent compatibility with silicone encapsulant systems
- Available in a wide range of colors
- Non-cytotoxic and Non-mutagenic
- Appearance : Viscous colored fluid
- Viscosity : 110 mPaâ‹…s Â± 5% at NTP
- Density : 1058 Kg/m3 Â± 1% at NTP
- Odor : Moderate Acrylic Odor
- Solids content : >99.9 wt%
- Curing spectrum : 365 - 405 nm
- Curing time : 5 - 10 secs
- Flexural Strength : >21 MPa
- Elongation : 8 - 10%
- Sorption : <40 ug/mm3
- Solubility : <11 ug/mm3
-Shrinkage : <0.3%-0.5%
- Hardness : 85 Shore D
- Biocompatibility : Non-cytotoxic, non-mutagenic and non-sensitizing
- 3IDEA DentX 104 series is photopolymer resin series intended for Dental prototype 3D printing.
- The rheology characteristics of DentX 104 series provides
- stable and consistent performance on most DLP and SLA 3D printing machines.
- Excellent compatibility with silicone encapsulant systems. Non-cytotoxic and Non-mutagenic
- DentX 104 series resins can be cleaned up with IP Alcohol or other environmentally friendly UV blanket
- washes. Printing equipment should be cleaned before and after use.
- "The product can be stored and handled in stainless
- steel, dark glass or black plastic containers. This product should be stored in a sealed container, away from
- heat exceeding 40˚ C, in a well-ventilated area and should not be exposed to any direct light source."
- 3d resin printer sla design liquid castable dlp flexible grey uv 4k wanhao creality uv cure tough photon nova lcd high resolution module mold jewelry prototype designer form laser mini wax rapid castable