Ender-3 S1 + 3 Idea Combo-3 Filament (Grey, White, Red) 3D Printer

Brand: Creality
SKU: 3IDEA-BNDL-ENDR3-S1-PLA-GREY,WHT,RED

Rs. 34,903
    • Ender-3 S1, High-quality printing with

This Product is Out Of Stock......

Detail

Printer dimensions : 421 x 383 x 465 mm
Build size : 220x220x270 mm
Net weight : 4.65 kg
Leveling method : Manual leveling
Resume printing : Supported
Filament detector : No
Nozzle temperature : ≤ 260℃
Hotbed temperature : ≤ 100℃
Rated power : 150W
Supported filament : PLA/TPU/WOOD
Printing speed : ≤ 100 mm/s. Average printing speed
Extrusion method : Direct Drive extruder

  1.  Sprite" Direct Dual-gear Extruder】: The“Sprite" is lighter and features less inertia and more precise positioning, supports PLA/TPU/PETG/ABS print filaments.
  2.  【CR Touch Automatic Bed Leveling】: 16-point automatic bed leveling technology saves you the trouble of manual leveling and makes leveling simple and easy.
  3.  High-precision Dual Z-axis】: With a Z-axis dual-screw+Z-axis dual-motor design, Ender 3 S1 works smoother and more synchronously to lower the possibility of lines and ridges on the sides of your print, thus improving the printing quality.
  4.  【PC Spring Steel Printing Platform】: The innovative printing platform is a combination of a PC coating, a spring steel sheet and a magnetic sticker, the model can be sticked to the platform or take off more easier.
  5.  Power Loss Recovery and Filament Sensor】: Ender-3 S1 features the function of detecting filament runout or breakage/power loss and resume printing after recovery. By accurately recording the printing data at the time of power outage/filament runout or breakage, it helps to avoid the waste of filaments and time caused by accidents.
  6.  【Low-noise Design】: The brand-new 32-bit silent mainboard runs at low decibel levels, greatly reducing noise to let you enjoy your printing.
  7.  【Quick Assembling】: 96% of the printer body is pre-installed, making assembling extremely convenient with only 6 steps and the maintenance of the printer simple and easy.
  8.  Creality Ender-3 S1 3D Printer with Creality Ender series Premium PLA White,Red,Grey Filament (Combo Set)
  9.  Material: PLA(Polylactic Acid) -Eack Filament Weight: 1 KG (approximately 2.20 lbs) Spool

Average Rating

0%Recommended
0%
0%
0%
0%
0%