₹2499.00 MRP : ₹ 5878.0057% off

The extruder circuit in a 3D printer typically consists of several components and features aimed at controlling the extrusion process effectively.

₹6559.00 MRP : ₹ 12823.0049% off

Compatible:- CR-10, CR-10S, CR-10S4, CR-10S5 and CR-10 MINI Inductive probe auto-leveling device

₹1149.00 MRP : ₹ 1723.0033% off

₹579.00 MRP : ₹ 1126.0049% off

Memory card_8G_JS700X_MLC3.0 Brand : Creality Classification : Storage Media Machine Type : Filament Extrusion

₹999.00 MRP : ₹ 1498.0033% off

FOC Spare Part

₹999.00 MRP : ₹ 1498.0033% off

₹1549.00 MRP : ₹ 2323.0033% off

₹1249.00 MRP : ₹ 1873.0033% off

₹5089.00 MRP : ₹ 10933.0053% off

GT2 closed timing belt for GT2 Synchronous wheel and timing pulley. It is available with size of 200mm with width of 6mm. Material: Neoprene rubber. Length: Closed 200mm. Belt Width: 6mm

₹459.00 MRP : ₹ 688.0033% off

The Photon Mono 4K transparent cover blocks up to 99.95% of ultraviolet rays with a wavelength of 405nm, can be effective high resin solidification rate, and ensure your success in printing, and reduce wasting of resin.

₹6909.00 MRP : ₹ 13528.0049% off

Direct ports for BLTouch and filament runout sensor upgrades 32-bit processor with more flash storage space Integrated TMC2225 stepper motors Micro-SD card slot with pre-installed bootloader

₹289.00 MRP : ₹ 778.0063% off

Limit Switch Kit_Z-axis_Y-axis_X-axis_XE-axis_A Compatibility: Ender-5 S1_Ender-3 Neo_Ender-2 Pro_Ender-3_Ender-3 Pro_Ender-3 V2_Ender-3S_CR20__Ender-3 Max_Ender-5_CR-10_CR-10 V3_CR-10 S4_SV01_SV02_SV03__Ender-5 Plus_Ender-5 Pro_Ender-3 S1 Plus_Ender-3 S1_EEnder-3 S1 Pro_CR-10 Max_CR-10S Pro V2_CR-Laser Falcon (CV-30)_Ender-3 Max Neo_Ender-3 V2 Neo_CR-M4

₹13249.00 MRP : ₹ 22069.0040% off

The JR. Wifi Pro Quick Release steel head gives you enhanced durability for printing with corrosive filaments. Upgrade your printer with the corrosion-resistant heads. Printing with abrasive materials causes wear and tear quickly to standard (copper) nozzles. These strong, hardened steel nozzles are abrasion-resistant and can last 100x longer when printing metallic PLA and carbon fiber, helping you save money on replacing worn-out nozzles.

₹269.00 MRP : ₹ 748.0064% off

A limit switch is a crucial component in 3D printers, used to detect the position of the printer moving parts. In the context of the CR-5 Pro, the limit switch likely serves to detect the position of the printer build plate or extruder carriage.

₹729.00 MRP : ₹ 1093.0033% off

₹2839.00 MRP : ₹ 6643.0057% off

Fast Heating: Quickly reaches optimal temperatures. Even Heat: Uniform heat distribution for consistent prints. Durable: High-quality, long-lasting materials. Strong Adhesion: Minimizes warping during printing. Easy Removal: Prints detach effortlessly after cooling. Perfect Fit: Designed for Anycubic Kobra Max. Energy Efficient: Optimized for low power usage.

₹4029.00 MRP : ₹ 7873.0049% off

Durable aluminum construction. Non-stick coating for easy resin release. High capacity for large prints. Precisely fits M5s and M5s Pro models. Leak-proof design for cleanliness. Clear resin volume markings. Replaceable FEP film for maintenance. Lightweight and easy to handle.

₹1419.00 MRP : ₹ 4138.0066% off

Blower Fan_4020_24V_0.10A_6000±10%_L150 Compatible with Creality CR-10S Pro

₹5719.00 MRP : ₹ 11188.0049% off

₹679.00 MRP : ₹ 1963.0065% off

24V-4020 Fan made of special and premium materials. It is high temperature resistant and extremely durable. Excellent for cooling heat sinks on hot ends, prints, or other cooling needs. It is made of high-quality PBT + 30percent glass line + VO and Bearing with high precision, providing long life and low noise. It can be taken in used to handle the temperature cooling 75degreeC. Its Working temperature is 40degreeC with a continuous working 24-hour capacity.

₹1109.00 MRP : ₹ 2698.0059% off

Dual-axis Stepper Motor_42-48_1A_1.8_degrees_18_round_shaft_D5 Compatible: Ender 5 Plus

₹1139.00 MRP : ₹ 1708.0033% off

Creality 3D® 310*310mm Flexible Cmagnet Build Surface Plate Soft Magnetic Heated Bed Sticker Easy removal 3D printing platform for PLA and PLA-based materials. To use it, simply stick the bottom plate onto your build plate and start printing, peel up the top plate with finished prints, then peel off the top plate from the prints. Snap the top plate back into place for next round of printing.

₹3539.00 MRP : ₹ 6898.0049% off

ANYCUBIC UV Resin Vat Tank for Photon Mono X, 3D Printers Accessories, Material

₹5113.00 MRP : ₹ 7669.0033% off

FLSUN S1 Camera

₹3009.00 MRP : ₹ 7078.0057% off

SR Effector For SR Printer

₹10049.00 MRP : ₹ 19123.0047% off

Compatible with Foto Series LCD 3D Printer Made of high-quality aluminum alloy, durable and easy to replace. Metal Resin Tank with FEP film Pre-Installed. The inner wall is marked with a scale to accurately add resin.

₹2999.00 MRP : ₹ 5397.0044% off

₹6919.00 MRP : ₹ 10378.0033% off

₹1009.00 MRP : ₹ 2938.0066% off

The Kobra 2 Neo limit switch is designed to detect the presence or absence of an object or to monitor and indicate whether the movement limits of a particular mechanism have been exceeded.

₹4309.00 MRP : ₹ 8413.0049% off

The nozzle uses a 0.4mm bimetal nozzle. This special design ensures extrusion flow and greatly increases its durability.

₹929.00 MRP : ₹ 2338.0060% off

42-34 Stepper motor_42-34_press_2GT-20-tooth_synchronous_pulley Creality 3D 34 Stepper Motor with Timing pulley is Adopting high-quality motor steel material for 3D printers. This stepper motor is provided with high torque, low self-inductance reactance, is responsive, and can avoid system error.

₹90519.00 MRP : ₹ 167503.0046% off

Mainboard for CreatBot F160 and F430.

₹419.00 MRP : ₹ 766.0045% off

An NTC 3-pack for an FDM 3D printer typically refers to a set of NTC thermistors used for temperature sensing and control within the printers hotend or heated bed. NTC (Negative Temperature Coefficient) thermistors are electronic components that change resistance with temperature. They are commonly used in 3D printers to monitor and control the temperature of the hotend (where filament is melted) and/or the heated bed (where prints adhere during printing).

₹1319.00 MRP : ₹ 3853.0066% off

Automatic Detection: Detects filament breakage or depletion. Seamless Recovery: Pauses printing and resumes once filament is restored. Enhanced Print Reliability: Reduces print failure risks due to material issues. Easy Installation: Simple setup for quick integration. Compatible: Designed for Anycubic Kobra 3 and Kobra 3 Combo.

₹6129.00 MRP : ₹ 11968.0049% off

The energy storage board provides backup power to cope with power interruptions or instability.

₹11399.00 MRP : ₹ 21688.0047% off

The Smooth PEI Sheet supports heating up to 80°C, while the Textured PEI Sheet can withstand up to 110°C. For temperatures above 80°C, using an enclosure is recommended to ensure stability and prevent warping caused by low ambient temperatures.

₹26509.00 MRP : ₹ 48973.0046% off

Fits for: Creator 3 Pro **NOT compatible with Creator 3**

₹1079.00 MRP : ₹ 3133.0066% off

Smooth Filament Feeding Stable Operation Precise Temperature Control Heat Resistant Bruss Nozzle New Upgrade Throat Tube Optimized Nozzle Full Hotend Assembly Fan Shroud 2x Mounting Screws and washers

₹7259.00 MRP : ₹ 14188.0049% off

Pictor Film High-Speed Release Film Low Release Force Stable Release Force Good Flexibility Support High-speed Printing

₹13079.00 MRP : ₹ 24898.0047% off

Flashforge Build Plate Heater Includes: Magnetic bed with heater (1 pcs)

₹1229.00 MRP : ₹ 3583.0066% off

Z axis mounting beam For Creality Ender-3, Ender-3 Pro, Ender-3 v2

₹3979.00 MRP : ₹ 7783.0049% off

ANYCUBIC Photon M3 3D Printer Optical Modeling Dedicated Motherboard Optical Format Base for 3D Printers

₹309.00 MRP : ₹ 1230.0075% off

The Power Grip 2GT system is an extension of the HTD system with greater load-carrying capacity. HTD drive clearance, using small diameter pulleys, is approximately four times greater than an equivalent 2GT timing belt drive. As smaller diameter pulleys are used, the clearance required to operate properly is increased. Circular arc tooth profile, tooth space is small, suitable for straight-line driving.

₹4749.00 MRP : ₹ 9268.0049% off

Double Sided Smooth PEI Surface for Flat Model Surface Textured Sticker - No Model Movement or Warping Thin and Light Compatible Models: - Ender-3_Ender-3 Pro_Ender-3S_Ender-3 V2_Ender-5_Ender-5S_Ender-5 Pro_Ender-3 S1_Ender-3 S1 Pro-Ender-3 S1/Ender-3 S1 Pro please remove the two positioning screws on the hotbed first

₹1039.00 MRP : ₹ 1558.0033% off

₹1969.00 MRP : ₹ 2953.0033% off

₹2409.00 MRP : ₹ 4683.0049% off

A magnetic platform is a useful accessory for 3D printers that allows for easier removal of printed objects and can facilitate bed leveling and adhesion. For the Kobra 2 Max 3D printer, you would typically look for a magnetic build surface that matches the size and specifications of your printers bed. Magnetic platforms often use flexible magnetic sheets with an adhesive backing that attaches to your existing build plate.

₹959.00 MRP : ₹ 2788.0066% off

Overview The Silicone Sock for Hotend is made from high-quality silicone for higher temperature resistance

₹1089.00 MRP : ₹ 3193.0066% off

Creator 4 Spool Holder

₹519.00 MRP : ₹ 952.0045% off

Offset Measurement Module

₹2109.00 MRP : ₹ 4933.0057% off

The CNC Bits - 4mm Shank set includes three high-quality bits designed for precision machining, milling, and engraving tasks. Each bit features a 4mm shank, ensuring compatibility with a wide range of CNC machines, and they are made from durable materials that provide excellent cutting performance and long-lasting wear resistance. This set comes with a spindle collet, enabling secure and stable attachment to the machine spindle, enhancing precision and reducing vibration during operation. Ideal for wood, plastic, and soft metals, this bit set is perfect for detailed and efficient CNC work.

₹769.00 MRP : ₹ 1153.0033% off

₹389.00 MRP : ₹ 1108.0065% off

Micro SD Card Reader Module also called Micro SD Adaptor is designed for dual I/O voltages. This Module is a simple solution for transferring data to and from a standard SD card. The pinout is directly compatible with Arduino, but can also be used with other microcontrollers. This module has an SPI interface which is compatible with any SD card and it uses a 5V or 3.3V power supply which is compatible with Arduino UNO/Mega. SD module has various applications such as data logger, audio, video, and graphics.

₹3799.00 MRP : ₹ 5639.0033% off

The Print Sheet with Double-Sided Printing Stickers from Snapmaker is designed as a replacement piece for the Snapmaker 2.0 3-in-1 A350 3D Printer. This customized platform sticker helps to ensure first-layer adhesion, ensuring your prints are well secured to the plate. Use this to immediately replace your current damaged sheet or keep this in reserve to minimize production downtime.

₹929.00 MRP : ₹ 2698.0066% off

Nozzles are made of high-quality brass, high hardness, better wear resistance, Low Thermal Conductivity, Corrosion Resistance, good thermal conductivity, and improved printing effect. It has a smooth inner wall without burr, minor viscosity coefficient, reducing resistance, smooth feeding, and works with most FDM printing materials such as PLA, ABS, PETG, TPE, TPU, PC, etc. High-temperature filaments such as PEEK, PEKK, PEI, PSU, PPSU, etc.

₹3579.00 MRP : ₹ 6988.0049% off

This resin tank kit is compatible with Anycubic Photon Mono X. The FEP film is pre-installed, so it is very easy to install the resin tank. It can be resistant to high temperatures up to 204 degrees Celsius and has over 95% light transmittance. Please level the machine after installing the resin tank, then it will have a good result. You will get 1 piece of Resin vat.

₹539.00 MRP : ₹ 808.0033% off

Compatible with - Ender-3 Series/Ender-5 Series/ CR-10/Ender-6/CR-6 Series

₹1839.00

Ultrabase Glass Build Plate for 4Max pro

₹3569.00 MRP : ₹ 6973.0049% off

COMPATIBLE:- Ender-3 Pro _Ender-3 V2_CR-6 SE_Ender-7_Ender-5 Pro_CR-5 Pro_CR-5 Pro H_SV05_SV01 Pro_CT-380_Ender-3 Max Neo_Ender-3 Neo_Ender-3 S1_Ender-3 S1 Pro_Ender-3 S1 PLUS_Ender-3 V3 SE_Ender-3 V3 KE_CR-10 SE

₹929.00 MRP : ₹ 1393.0033% off

The anti-scratch film can effectively prevent damage to the LCD screen caused by resin leakage or resin curing directly above the screen, and also prevent screen scratches during the movement of the resin tank.