Welcome to 3idea Technology!

TronHoo PLA+ Black


TronHoo PLA 3D filament use high purity raw materials that have low shrinkage and good layer bonding features, meeting your demands for different printing projects with higher toughness. It is 100% made of environment-friendly natural materials. It’s biodegradable, non-toxic and environmentally friendly. Completely dried for 24 hours before packaging and vacuum sealed with desiccants, enable much smoother and more stable printing. Since the PLA filament is prone to moisture, please store it into a dry and cool place to matiain excellent printing performance.

  •  Good toughness, High strength, High stiffness
  •  No block nozzle, Good stick hot bed
  •  Cost-effective can be processed in wide range temperature;
  •  Low shrinkage, thermoforming dimensional stability
  •  Accurate diameter: 3.0/1.75mm, variations ±0.1mm,roundness ±0.05mm;
  •  Suitable for a variety of 3D printer, Makerbot, UP, Cubify, Leapfrog, Reprap, Ultimate, Mendel, Prusa, Huxley etc.
    Diameter 1.75 ± 0.2mm :
    Printing temperature 175-200℃ :
    Heated bed temperature 50-80℃ :
    Density 1.25 ± 0.05 g/cm3 :
    Heat deflection temperature 50-60℃ :
    Melt flow rate 5-7 g/min (190℃ 2.16kg) :
    Tensile Strength ≥ 60 Mpa :
    Bending strength ≥ 70 Mpa :
    Elongation at break ≥3.0% :
    N.W. 1.0 kg :
    G.W. 1.3 kg :
    Length ≈ 330m :
  • Tronhoo

  • 3D Filaments

  • Black

Average Rating:

( 0 reviews )
Add a Review