Creality PLA Grey 1.75mm Net Weight 1kg

Brand: Creality
SKU: 3IDEA-CREALITY-PLA-GRY

Rs. 1,399
    • Creality PLA Grey is made of polylactic acid.
    • It is suitable for low-temperature printing and can be used in any project that requires an aesthetic finishing.
    • It easy to use and suitable to print models with fine details.

Detail

Colour : Grey
Material : CR-PLA
Dimension : 25.5CM*12CM*23CM
Density : 1.25±0.05g/gm³
Melt flow rate : 5-7g/min(190 degrees 2.16kg)
Water absorption : 0.5%
Tensile Strength : ≥60MPa
Flexural modulus : ≥60MPa
Elongation at break : ≥3.0%
Diameter : 1.75mm
Bubble : 100% no bubbles
Coil Diameter : 200mm
Coil Height : 66mm
Coil Inner Diameter : 56mm
Temperature : PLA no heated bed

  1.  No warping
  2.  Toughness enhancement
  3.  High precision
  4.  Small tolerance
  5.  No bubble
  6.  Green and non-toxicity
  7.  Good fluidity
  8.  Wide compatibility

Average Rating

0%Recommended
0%
0%
0%
0%
0%