img

Welcome to 3idea Technology!

Creality PLA Grey 1.75mm Net Weight 1kg

SKU: 3IDEA-CREALITY-PLA-GRY
 1,039

Taxes Included | Free Shipping

  •  Creality PLA Grey is made of polylactic acid.
  •  It is suitable for low-temperature printing and can be used in any project that requires an aesthetic finishing.
  •  It easy to use and suitable to print models with fine details.



    •  No warping
    •  Toughness enhancement
    •  High precision
    •  Small tolerance
    •  No bubble
    •  Green and non-toxicity
    •  Good fluidity
    •  Wide compatibility
      Colour : Grey
      Material : CR-PLA
      Dimension : 25.5CM*12CM*23CM
      Density : 1.25±0.05g/gm³
      Melt flow rate : 5-7g/min(190 degrees 2.16kg)
      Water absorption : 0.5%
      Tensile Strength : ≥60MPa
      Flexural modulus : ≥60MPa
      Elongation at break : ≥3.0%
      Diameter : 1.75mm
      Bubble : 100% no bubbles
      Coil Diameter : 200mm
      Coil Height : 66mm
      Coil Inner Diameter : 56mm
      Temperature : PLA no heated bed
    • Creality

    • Filaments

    • 1.20 KG

    • Grey

    Average Rating:

    ( 0 reviews )
    Add a Review