img

Welcome to 3idea Technology!

Creality PLA Sapphire Blue

SKU: 3IDEA-CREALITY-PLA-SPHRBLU
 1,899

Taxes Included | Free Shipping

Creality CR PLA Filament for 3D Printer These high quality CR PLA filament by the printer makers, Creality is great for all 3D Printing enthusiasts and is an upgrade from the standard PLA! This filament has good color consistence and have a specified shelf life of up to 6 months after opening and 1 year if unopened. Comes in vacuum sealed packaging with desiccant. CR PLA is also cold resistant while standard PLA is not. Note: Actual colours may vary. This is due to the fact that every monitor or mobile display has a different capability to display colours and that everyone sees these colours differently



  •  Good Printing Effect
  •  Dimensional Stability
  •  Non-toxic
  •  Wear Resistance, High Impact Strength
  •  Tough hard
  •  Eco-Friendly Filament
  •  Smooth Printing
  •  Good glossy surface
  •  
    • Material : CR-PLA
    • Dimension : 25.5CM*12CM*23CM
    • Density : 1.25±0.05g/gm³
    • Melt flow rate : 5-7g/min(190 degrees 2.16kg)
    • Water absorption : 0.5%
    • Tensile Strength : ≥60MPa
    • Flexural modulus : ≥60MPa
    • Elongation at break : ≥3.0%
    • Diameter : 1.75mm
    • Bubble : 100% no bubbles
    • N.W : 1kg(length
    • Coil Diameter : 200mm
    • Coil Height : 66mm
    • Coil Inner Diameter : 56mm
    • Temperature : PLA no heated bed
    :
  • Creality

  • 3D Filaments

  • Sapphire Blue

Average Rating:

( 0 reviews )
Add a Review