Creality PLA 3D Printing Filament Fluorescent Yellow ,1.75mm,Net Weight-1kg

Brand: Creality
Availability: Available
Rs. 1,433
(Check Amazon Reviews)   Write a review
    • Creality PLA Fluorescent Yellow filament has good color consistence and have a specified shelf life of up to 6 months after opening and 1 year if unopened. Comes in vacuum sealed packaging with desiccant. CR PLA is also cold resistant while standard PLA is not.
Add to Cart

Detail

Material : CR-PLA
Dimension : 25.5CM*12CM*23CM
Density : 1.25±0.05g/gm³
Melt flow rate : 5-7g/min(190 degrees 2.16kg)
Water absorption : 0.5%
Tensile Strength : ≥60MPa
Flexural modulus : ≥60MPa
Elongation at break : ≥3.0%
Diameter : 1.75mm
Bubble : 100% no bubbles
Coil Diameter : 200mm
Coil Height : 66mm
Coil Inner Diameter : 56mm
Temperature : PLA no heated bed

  1.  Good Printing Effect
  2.  Dimensional Stability
  3.  Non-toxic
  4.  Wear Resistance, High Impact Strength
  5.  Tough hard
  6.  Eco-Friendly Filament
  7.  Smooth Printing
  8.  Good glossy surface

Average Rating

(0 Reviews)
0%Recommended
0%
0%
0%
0%
0%
Login to Review
Check Amazon Reviews