₹9879.00 MRP : ₹ 14818.0033% off

The resin tank for 3D Nobel printers is one of the key parts for its proper functioning, since it is where the resin is located, which will subsequently solidify layer by layer through the beam of light generated by the printer itself. It is advisable to use a spare tank to store different types of resin or different colors. In this way you can change the printing materials between prints quickly and easily, without wasting resin and ensuring optimum print quality.

₹0.00 MRP : ₹ 11158.00100% off

XYZ Metallic Print Platform compatible with XYZ Nobel Superfine.

₹0.00 MRP : ₹ 17259.00100% off

XYZprinting RSJPWXY100D XYZprinting Stainless Steel Quick Release Extruder for da Vinci Junior WiFi. Printing with abrasive materials causes wear and tear quickly to standard (copper) nozzles. These strong, hardened steel nozzles are abrasion-resistant and can last 100x longer when printing metallic PLA and carbon fiber, helping you save money on replacing worn-out nozzles.

₹6459.00 MRP : ₹ 9688.0033% off

Replacement extruder for you Nano printer. The benefits of a reduced nozzle size is better XY resolution, allowing to to print in finer detail with better results. simple push and release print head mechanism. The Nano print heads have an in-built smart detection system that allows the Da Vinci Nano 3D printer to perform its Z-axis self calibration routine that makes calibration very easy, saving set-up time and ensuring that that all important first layer goes without a hitch every time.

₹0.00 MRP : ₹ 22069.00100% off

The JR. Wifi Pro Quick Release steel head gives you enhanced durability for printing with corrosive filaments. Upgrade your printer with the corrosion-resistant heads. Printing with abrasive materials causes wear and tear quickly to standard (copper) nozzles. These strong, hardened steel nozzles are abrasion-resistant and can last 100x longer when printing metallic PLA and carbon fiber, helping you save money on replacing worn-out nozzles.

₹4559.00 MRP : ₹ 6838.0033% off

The Jr. Wifi Quick Release is featured with a smart detection system which allows self-calibration of the Z-axis.

₹11099.00 MRP : ₹ 14679.0024% off

This Heated Bed is Compatible with Da Vinci Pro.

₹3999.00 MRP : ₹ 10933.0063% off

GT2 closed timing belt for GT2 Synchronous wheel and timing pulley. It is available with size of 200mm with width of 6mm. Material: Neoprene rubber. Length: Closed 200mm. Belt Width: 6mm

₹0.00 MRP : ₹ 3643.00100% off

Flex Ribbon cable is specially designed for the flexible cable .The cable usually consists of a flat flexible plastic film base, and multiple metal conductors are glued on a surface.

₹0.00 MRP : ₹ 3643.00100% off

Flex Ribbon cable is specially designed for the flexible cable .The cable usually consists of a flat flexible plastic film base, and multiple metal conductors are glued on a surface.

₹0.00 MRP : ₹ 18029.00100% off

XYZ JR. 1.0A Quick Release 0.4

₹0.00 MRP : ₹ 3643.00100% off

Flex Ribbon Cables , Ribbon Flex Extension Cable. This ribbon flat cable is specially designed for the flexible cable .The cable usually consists of a flat flexible plastic film base, and multiple metal conductors are glued on a surface.

₹2499.00 Out Of Stock

Antibacterial PLA (NFC) 600 G White is a special filament which uses silver ions to inhibit bacterial growth by at least 99.0 percent, greatly reducing the risk of infections. Its antibacterial agent also complies with RoHS regulations, making it the ideal 3D printing material for households and schools.

₹2161.00 Out Of Stock

It offers longer lifespan, better impact resistance, and finer appearance that makes it suitable for external components or model parts. Additionally, you can easily use common modeling tools to decorate, assemble or join different parts to create your perfect work.

₹1699.00 Out Of Stock

PLA filaments are extracted from biodegradable materials. Pla filaments print in bright colors and at a safe,print in low temperatures. The translucent texture and finishing will also add a unique look to your finished work.

₹1858.00 Out Of Stock

Product Details 1. 1 KG (approximately 2.20 lbs) Spool 2. 1.75mm Filament Diameter (Dimensional Accuracy 0.03mm 3. Recommended Printing Temp/Nozzle Temperature: 180-220 (356-428 ) - Base Plate Temperature: 0-50 (32-122 ) 4. Spool Diameter: 7.87 - Spool Width: 2.83 Spool Hub Hole Diameter: 2.20 5. High Compatible With Your 3D Printer: For common all 1.75 mm specification 3D printers Filament Storage 1. Since PLA material is made from biodegradable sources, it is susceptible to moisture. We recommended storing filament in a sealed plastic bag or box after each print. 2. If the filament gets damp, you can bake it in an oven with 50 (122 ) for about an hour to restore its dryness. Friendly Reminder(After Use) Be sure to insert the free end of the filament into the hole to avoid the filament being tangled for next time use.

₹2165.00 Out Of Stock

PLA filaments are extracted from biodegradable materials. Pla filaments print in bright colors and at a safe,print in low temperatures. The translucent texture and finishing will also add a unique look to your finished work.

₹2540.00 Out Of Stock

PLA filaments are extracted from biodegradable materials. Pla filaments print in bright colors and at a safe,print in low temperatures. The translucent texture and finishing will also add a unique look to your finished work.

₹0.00 MRP : ₹ 3558.00100% off Out Of Stock

PLA filaments are extracted from biodegradable materials. Pla filaments print in bright colors and at a safe,print in low temperatures. The translucent texture and finishing will also add a unique look to your finished work.

₹0.00 MRP : ₹ 14577.00100% off Out Of Stock

Compatible with XYZ Mini Series printers with a smart Filament detection system.

₹37726.00 Out Of Stock

The UV Curing Chamber outputs focused and consistent UV lights at 360° to cure prints made with photopolymer resins. The post curing process increases the hardness and durability of the printed products.

₹22539.00 Out Of Stock

Castable XYZprinting Resin for the Nobel Superfine SLA 3D printer and Nobel 1.0A 3D printers. XYZ’s F1 castable resin has been specially formulated for lost-wax casting. The properties of the castable resin are similar to wax, and no ash residue is left after burn out. Using a castable resin allows you to turn your highly intricate and detailed models into usable items. It is ideal for both castable dental and jewellery models. Superfine standard resin is designed to produce high precision, high quality 3D prints with very good surface detail. Castable resin is both soft and brittle like wax so you will need to take some care during the printing process. In terms of model design you should look at minimum wall thicknesses of 0.4mm and a minimum hole diameter of 1mm. After removing the object from the platform clean with ethyl alcohol at >95% concentration. Alsways make sure to give it the appropriate post curing UV exposure, you can alsways use XYZ UV resin curing chamber.

₹5404.00 Out Of Stock

This resin resists deformation, making it suitable for engineering prototypes with thin features.

₹0.00 MRP : ₹ 3643.00100% off Out Of Stock

Special productions such as folding processing, wire splitting, terminal bonding, and double-sided tape or any other customized processing per your specifications.

₹9999.00 Out Of Stock

compatible with DV super

₹7999.00 Out Of Stock

compatible with DV super

₹0.00 MRP : ₹ 13719.00100% off Out Of Stock

This Adapter is compatible with XYZ JR Series 3D Printer.

₹6999.00 Out Of Stock

Replacement tank for Nobel 1.0/1.0A 3D printer

₹3255.00 Out Of Stock

Compatible with Pro Series XYZ printers.

₹8640.00 Out Of Stock

With the Open Smart Tag, you can explore 3D printing several materials from a range of filament brands. Use this device to have more options for your 3D models and prototypes. Broaden your creativity by printing objects with contrasting filament materials for different functions and applications.

₹0.00 MRP : ₹ 6838.00100% off Out Of Stock

The 12v 40W Ceramic Cartridge Heater is a powerful little beast of a heater. Get rid of fragile and poor tolerance enamel resistors and switch to a purpose made high power ceramic heater cartridge. Increase the reliability of your extruder with this heater cartridge. Also, it heats up faster. It fits nicely in our extruder, so its an easy replacement. Get your hot end hot quickly and hit the highest of temperatures. Comes with a meter of silicone insulated high-temperature wire.

₹14670.00 Out Of Stock

This Resin Tank is Compatible with XYZ Nobel series Printer