Anycubic ABS Like Resin White color
Rs. 2,449
- torage method:
- Keep away from light seals at room temperature. (Sunshine contains a lot of UV light, will solidify photosensitive resin. After testing, the light is not affected as long as it is not UV light).
- It is recommended to save at 15 โ -35 โ ambient temperature, the lower the temperature, the higher the viscosity of the resin. Sealed storage, excessive dust or moisture can affect print quality. Sunshine contains a lot of UV light, will solidify photosensitive resin.
- Usage:
- Shake well before use, prohibiting the use of resin in places where there is a lot of sunlight.
- Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.
- Inadvertent contact, as soon as possible to use a lot of water rinse. If you feel unwell, seek timely medical attention.
- Printed models need to use high-concentration alcohol to clean about 30S (recommended concentration of 95% or more, the higher the better).
- Do not pour the resin in the resin vat into the unused resin, do not leave the resin in the resin vat for a long time without use to avoid resin pollution affect the printing effect(long time without the resin can be introduced into airtight containers or sealed with plastic wrap shading save).
This Product is Out Of Stock......
Detail
High Precision : | Low shrinkage, dimensional stability when printing. The model has high precision and clear details |
Low Viscosity, Fast Printing : | The resin with low viscosity means it has great fluidity during the printing process and helps to improve printing speed |
Excellent Tensile and Bending Strength : | ANYCUBIC ABS-Like resin shows good strength and elongation and can resit chipping, cracking and stress mark due for cyclic vibration movement |
Focus on Research and Development : | As a leading manufacturer and pioneer of desktop 3D printers in the world, anycubic has been committed to developing better products for many years |
Long Conservation Period : | The conservation period of the Anycubic ABS-Like Resin+ is 18 months, which is longer than other resins on the market. |
Multiple colors available : | Products used in the pictures are real products, still, there may be color difference due to light or display.The color of the product received shall prevail. |
: |
- ใ๐๐ฑ๐๐๐ฅ๐ฅ๐๐ง๐ญ ๐๐๐ง๐ฌ๐ข๐ฅ๐ ๐๐ง๐ ๐๐๐ง๐๐ข๐ง๐ ๐๐ญ๐ซ๐๐ง๐ ๐ญ๐กใ Adding PUA (polyurethane acrylate) to the formula gives the resin excellent tensile and bending strength as well as hardness and toughness.It has past extensive testing and can perform under a normal tensile force and compressive stress. It can be stretched with good crack resistance capability so as to ensure no breakage on the model
- ใ๐๐๐ญ๐ญ๐๐ซ ๐ ๐ฅ๐ฎ๐ข๐๐ข๐ญ๐ฒ ๐๐ฆ๐ฉ๐ซ๐จ๐ฏ๐๐ฌ ๐ญ๐ก๐ ๐๐ข๐ ๐ก ๐๐ซ๐๐๐ข๐ฌ๐ข๐จ๐งใImproved fluidity significantly reduces curing time, and ensures a printing accuracy of ยฑ0.1mm. It can provide high accuracy, smooth surface, clear print details and low shrinkage rate advantages for model printing. Take a full shake before use in order to have a fully mix the functional components and fully mix the color paste in the resin. Otherwise, uneven coloring of the print may occur.
- ใ๐ ๐๐ฌ๐ญ ๐๐ซ๐ข๐ง๐ญ๐ข๐ง๐ ๐๐ง๐ ๐๐ข๐ ๐ก ๐๐ฆ๐ฉ๐๐๐ญ ๐๐ญ๐ซ๐๐ง๐ ๐ญ๐กใBenefiting the upgraded formulation, anycubic ABS-like resin+ has good fluidity, which can effectively increase printing speed, success rate and are easy to clean. And this 3D printing resin has an excellent combination of stiffness and toughness. It is not fragile and strong enough to withstand accidental falls from time to time
- ใ๐๐-๐ฆ๐จ๐ง๐ญ๐ก ๐๐ฑ๐ฉ๐ข๐ซ๐๐ญ๐ข๐จ๐ง ๐๐๐ญ๐ใMost resin for 3D printing have a expiration date of only one year. With upgrades to the formula and packaging, Anycubic ABS-Like Resin + extends its expiration date to 18 months. In order to reduce the probability of ๐ฒ๐๐ฅ๐ฅ๐จ๐ฐ๐ข๐ง๐ of the transparent model, it is suggested that: 1. The curing time after the model is controlled within 2-3minutes; 2. Do not dry the molded model in the sun
- ใ๐๐ข๐๐๐ฅ๐ฒ ๐๐จ๐ฆ๐ฉ๐๐ญ๐ข๐๐ฅ๐ใAs a leading manufacturer and pioneer for global desktop 3D printers, Anycubic put the compatibility to LCD and DLP at the center of its attention while developing the ABS-Like Resin +, making it compatible for most printers of both types