Creality 4010 Hotend Blower Fan 24V
Rs. 679
- 24V_6800_L150
- Easy replacement
- Efficient heat dissipation
- Silent and low noise
- Compatible Hotend: Ender-3_Ender-3 Pro_Ender-3S_Ender-3 V2_Ender-3 Max_Ender-5_Ender-5s_Ender-5 Pro_Ender-5 Plus_Ender-6_CR-5 Pro H(CT-380)_CR-X_CR-X Pro_CR-6 SE_CR-6 Max_CR-30_CR-200B_ CR-3040Pro_CR-5060 Pro_CR-5 Pro_Ender-2 Pro
Detail
| Rated Volt : | DC 24V, Connector |
| Operating Voltage : | 24V DC |
| Compatible Hotend : | Ender-3_Ender-3 Pro_Ender-3S_Ender-3 V2_Ender-3 Max_Ender-5_Ender-5s_Ender-5 Pro_Ender-5 Plus_Ender-6_CR-5 Pro H(CT-380)_CR-X_CR-X Pro_CR-6 SE_CR-6 Max_CR-30_CR-200B_ CR-3040Pro_CR-5060 Pro_CR-5 Pro_Ender-2 Pro |
| Max. Operating Current : | 100mA |
| Rated current : | 0.06A, Rotating speed |
| Noise Level : | 25±10%dBA |
| Size : | 40×10 |
| Gross weight : | 19g |
| Net weight : | 15g |
| Packing size : | 140+50×80mm |
- DC 24V 0.1A operation voltage, fit for Ender 3 3D printer extruder.
- 2Pin connector, wire length approx. 120cm / 47.2in.
- Waterproof, dust-proof, and super noise-reduced.
- Easy installation and high-efficiency heat dissipation,
- Extend the life of your 3D printer, the best accessory for you.
- The 24V 4010 Cooling Fan for 3D Printer is a Small but powerful exhaust cooling designed for the 3D printer. It has a pin connector to connect to a printer controller. The fan operates at 24V supply and operates automatically by the Printer controller system. It is used to mount extruders to maintain the temperature of an extruder for seamless printing.
Mayur Pawar 2021-03-09 22:27:06
Quality Product