Double-Sided Golden PEI Plate Kit 235*235mm

₹1711.00

Double-Sided Golden PEI Plate Kit 235*235mm
(0 reviews)
Product Features

PETG/PCTG/TPU– If you are not careful with your 1st layer you can risk bonding the PETG/PCTG/TPU to the PEI surface. This will damage the surface. To prevent damage to the surface apply hairspray or PVA gluestick before printing PETG/PCTG/TPU on the PEI

Part Removal– Make sure your plate is close to room temp (under 30C) before removing parts. If you remove it when hot it is more likely to damage the surface.

Cost-effective

Easy Model Removal

Excellent Flatness

Durable

₹1711.00
Out Of Stock

Guarantee Safe Checkout:

  • card
  • card
  • card
  • card

Estimated delivery time: 4-5 business days

Free shipping on all orders

Double-Sided Golden PEI Plate Kit 235*235mm
  • 1. Special Design: Double Sided Textured PEI Sheet, Double Side can print, Good Adhesion to the PEI surface, easy to remove the prints, flex slightly to pop your print right off.
  • 2. Good Quality: Magnetic, Flexible, Removable Steel Flex PEI Plate, It can stick to magnetics very well. High strength and heat resistance.
  • 3. Easy to Install: PEI spring steel sheet is flat and flexible, it comes without a magnetic base, but could be magnetically attracted to the hotbed, because the BamBu 3D printer heated bed is magnetic, just put and print.
  • 4. Easy to Clean: PEI 3d printer bed adhesive uses a soft cloth to clean the dust. Gently wipe the stain with a low concentration of alcohol.
  • PETG/PCTG/TPU– If you are not careful with your 1st layer you can risk bonding the PETG/PCTG/TPU to the PEI surface.
  • This will damage the surface.
  • To prevent damage to the surface apply hairspray or PVA gluestick before printing PETG/PCTG/TPU on the PEI Part Removal– Make sure your plate is close to room temp (under 30C) before removing parts.
  • If you remove it when hot it is more likely to damage the surface.
  • Cost-effective Easy Model Removal Excellent Flatness Durable.
  • Compatible Models : Ender-3/Ender-3 Pro/Ender-3S/Ender-3 V2/Ender-5/Ender-5S/Ender-5 Pro/Ender-3 S1/Ender-3 S1 Pro/Ender-3 V2 Neo - To be compatible with Ender-3 S1/Ender-3 S1 Pro, (Kindly remove the two positioning screws on the hotbed first)
  • Packing Size : 250×265×8mm
  • Gross Weight : 550g
  • Net Weight : 430g
Customer review
  • (0)
0.0 /5.0
5
0
4
0
3
0
2
0
1
0
Write a review
Write a review

Your email address will not be published. Required fields are marked *

Your rating *