₹839999.00 MRP : ₹ 1499998.0044% off

High-Temperature Capabilities: Supports PEEK, PEI, and other advanced filaments. Large Build Volume: Spacious printing area for large-scale projects. All-Metal Hotend: Designed for high-performance materials. Dual Extruders: Enables multi-material and multi-color printing. Heated Print Bed: Ensures better adhesion and minimizes warping. Industrial-Grade Design: Robust and reliable for professional use. Advanced Cooling System: Optimizes temperature for consistent quality.

₹499999.00 MRP : ₹ 769497.0035% off

Big Build Volume - 400*300*300mm High Resolution Heat Control System -Hotend 260°C + 420°C, Hot Bed 120°C, Hot Chamber 70°C Compatible Filament - Consumer-grade: PLA, ABS, PETG, PVA, PC, etc Industrial-grade: UltraPA, PA-CF, PA-GF, ASA, TPU/E, PP, PVDF, etc High Performance: PEEK, PEEK-CF, PPS, etc Fully Enclosed+Hot Chamber 70°C Power loss recovery and filament runout sensor HEPA Air filter Aviation aluminum platform + automatic leveling

₹1899999.00 MRP : ₹ 2574000.0026% off

The Creatbot PEEK-300 is an FDM industrial 3D printer designed for printing with professional-grade materials, including PEEK and Ultem. It is equipped with engineering-grade components capable of withstanding high printing temperatures. Specifically, this dual extruder 3D printer sports ultra-high-temperature nozzles (500°C), a hot build chamber, a heated print bed, and high-temperature resistant motors, rails and belts. Thats why it ensures long-lasting, reliable performance over time. Despite its advanced features, it is sold at an affordable price for almost any company and organization.

₹1669999.00 MRP : ₹ 1820000.008% off

Outage Restored: Save data when power is off Filament Detection: Pause printing when the filament runs out Thermal insulation : Three layer insulation+Active air cooling (Chamber temp. reaches 180 ° C, the external surface temp. is less than 40 ° C) High temperature accessories: High temperature resistance motors, linear rails, belts and circuits to ensure long-time high temperature printing. Doors cooling: Active air cooling

₹4762.00

₹4002.00

PLA-CF is a high strength modified PLA carbon fiber reinforced 3D printing consumable. It strengthens the tensile strength and impact strength of the raw material, while improving the dimensional stability of the print and the surface quality of the print. It is widely used in prototyping, conceptual models, end-use components and models with higher performance requirements.

₹5523.00 MRP : ₹ 7732.0029% off

₹3242.00 MRP : ₹ 4538.0029% off

₹3242.00 MRP : ₹ 4538.0029% off

₹15568.00

₹4762.00

₹3242.00

PLA (polylactic acid) is a degradable 3D printing material. It has excellent comprehensive performance, economic benefits, printing model surface is fine and smooth, and not easy to warp deformation. Widely used in the market for a variety of printers.

₹24526.00

₹9365.00

₹3629.00 MRP : ₹ 7078.0049% off

Extruder board for CreatBot F160

₹13149.00 MRP : ₹ 25033.0047% off

CreatBot F430 Extuder cable

₹1869.00 MRP : ₹ 4378.0057% off

Dedicated for: CreatBot F430 CreatBot D600 Pro CreatBot F160 CreatBot DX CreatBot DX Plus CreatBot DE CreatBot DE Plus CreatBot PEEK-300

₹90519.00 MRP : ₹ 167503.0046% off

Mainboard for CreatBot F160 and F430.

₹6279.00 MRP : ₹ 12268.0049% off

Aluminum hot end for temperatures up to 260°C. Equipped with a brass nozzle and a hole for a 3mm temperature sensor and a PTFE heatbreak.

₹6279.00 MRP : ₹ 12268.0049% off

Aluminum hot end for temperatures up to 260°C. Equipped with a brass nozzle and a hole for a 3mm temperature sensor and a PTFE heatbreak.

₹2769.00 MRP : ₹ 4993.0045% off

The CreatBot 0.6mm nozzle is engineered for precision and durability, making it an excellent choice for 3D printing applications that require a balance between speed and detail. With a slightly larger diameter than the standard 0.4mm nozzle, it allows for faster extrusion rates, enabling quicker print times while still maintaining a good level of detail. The nozzle is made from high-quality materials, ensuring resistance to wear, especially when printing with abrasive filaments like carbon fiber or metal-filled materials. Its designed to provide smooth and consistent filament flow, reducing the likelihood of clogs and ensuring a reliable printing experience.

₹1869.00 MRP : ₹ 4378.0057% off

The premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print.

₹6279.00 MRP : ₹ 12268.0049% off

The premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. All nozzles from PrimaCreator are made from the best high-quality brass or steel (depending on type) and are completed in a state of the art factory. All nozzles are manufactured with a tolerance of less than ± 0.01 mm. This means that your filament will have a very smooth and clear surface while extruding which, of course, results in better prints.

₹1869.00 MRP : ₹ 4378.0057% off

The CreatBot heating tube is a critical component in the 3D printing process, designed to provide consistent and reliable heat to the hotend. This heating tube ensures that the nozzle reaches and maintains the desired temperature quickly, facilitating smooth and even extrusion of filament. Built with high-quality materials, the heating tube is durable and capable of withstanding extended use at high temperatures, making it suitable for demanding printing environments. Its precision engineering ensures minimal temperature fluctuations, which is essential for achieving consistent print quality, especially when working with advanced materials.

₹213749.00 MRP : ₹ 404997.0047% off Out Of Stock

High-Temperature Printing: Supports PEEK and other advanced materials. All-Metal Hotend: Handles high-temperature filaments. Large Build Volume: Ideal for complex prints. Heated Print Bed: Reduces warping and improves adhesion. Industrial Design: Durable and reliable for long-term use. Fully Enclosed High-Temperature Chamber Outage Restored & Filament Detection Touch ScreenEfficiently Platform & 150°C Hotbed

₹272489.00 Out Of Stock

Printer with Bed size 300*250*300 mm.the first one to publish 350°C ultra-hight temperature Triple nozzle. The printer will automatically memorize the current position and save print data. Lower the platform and withdraw filament when power off suddenly. It will continue to print from the last stopped point after power’s on.

₹326751.00 Out Of Stock

Printer with Bed size 300*250*520 mm.the first one to publish 350°C ultra-hight temperature Triple nozzle. The printer will automatically memorize the current position and save print data. Lower the platform and withdraw filament when power off suddenly. It will continue to print from the last stopped point after power’s on.

₹365752.00 Out Of Stock

Printer with Bed size 400*300*300mm. We are the first one to publish 350°C ultra-hight temperature nozzle to mass market and it possess exclusive patent. This kind of nozzle allow to print with a variety of filaments. And the fantasy blue metal cooling sink can efficiently cool down the heatbreak. The nozzle height can also be micro adjusted. And we accept customized for single/double/triple head. We exclusively research and develop the extruder feeding system support high-speed printing, and accuracy can reach high to 0.05mm, it allows to extrude filament steady without block.

₹383557.00 Out Of Stock

Printer with Bed size 400*300*520mm. We are the first one to publish 350°C ultra-hight temperature nozzle to mass market and it possess exclusive patent. This kind of nozzle allow to print with a variety of filaments. And the fantasy blue metal cooling sink can efficiently cool down the heatbreak. The nozzle height can also be micro adjusted. And we accept customized for single/double/triple head. We exclusively research and develop the extruder feeding system support high-speed printing, and accuracy can reach high to 0.05mm, it allows to extrude filament steady without block.

₹1493381.00 Out Of Stock

The CreatBot D600 is truly an impressive manufacturing machine. Its super large and completely closed build space of 600 x 600 x 600 mm is perfect if you like to process advanced filaments like PEEK, Ultem, Nylon, PC or other thermoplasts that need high-temperatures (for example ABS). Realize industrial FFF / FDM 3D prints of complex parts.

₹1612078.00 Out Of Stock

3D print with the CreatBot D600 Pro very large and complex parts and objects. The D600 Pro is an industrial high temperature 3D printer with a very high manufacturing quality and enormously large heated installation space (60x60x60 cm). Use it to produce high-quality and sophisticated components additive.

₹1679.00 Out Of Stock

PETG (polyethylene terephthalate) is a copolymer modifier of ethylene glycol and PET. It is as easy to print as PLA. It has good toughness and chemical resistance, and the print has good layer adhesion. Suitable for printing all kinds of parts, can be used for mechanical parts, fixture, prototype design and so on.

₹1209.00 MRP : ₹ 2418.0050% off Out Of Stock

PLA (polylactic acid) is a degradable 3D printing material. It has excellent comprehensive performance, economic benefits, printing model surface is fine and smooth, and not easy to warp deformation. Widely used in the market for a variety of printers.

₹22175.00 Out Of Stock

Essentium PEEK High Temp Exotic Filament 1.75 mm- Extremely Strong, Shockingly Heat Resistant, Chemical Resistant 3D Printing Filament, High Heat Deflection...

₹1999.00 Out Of Stock

Ultra PA (High Temperature Polyamide) is a special high temperature nylon 3D printing material. High wear resistance, toughness, higher strength and durability, as well as good heat resistance and lower moisture absorption, make high temperature nylon an ideal choice for a variety of 3D printing applications. Print surface feel smooth, good dimensional stability.

₹16999.00 Out Of Stock

Extruder motor with gear for CreatBot F160, D600 and D600 Pro Typ: 42HS40

₹1409.00 MRP : ₹ 2746.0049% off Out Of Stock

The CreatBot PEEK300 is a high-performance 3D printer designed for printing high-temperature materials like PEEK, PEI, and other engineering-grade plastics. The flat cable from the extruder to the motherboard is a crucial component for transmitting signals and power between these parts.

₹16999.00 Out Of Stock

A high-temperature hot end for the industrial grade Creatbot machines, compatible with the CREATBOT PEEK-300 3D Printers.

₹7769.00 MRP : ₹ 9949.0022% off Out Of Stock

Brass hot end for temperatures up to 420°C. Equipped with a brass nozzle and a hole for a 3mm temperature sensor and a full metal heatbreak.

₹200000.00 Out Of Stock

1. Slick Edge: The air assist pump of the engraving machine uses air to quickly reduce the temperature of the cut object to avoid deformation and discoloration caused by high laser temperature. The powerful airflow blows away residue to ensure a slick and cutting edge. 2. Faster and Deeper Cutting: The air assisted pump is equipped with strong and high speed airflow to blow away smoke, residue generated during the work of the engraving machine, keeping the laser focused on cutting, speeding up the cutting process and increasing the cutting depth. 3. Durable and Stable: The air assist pump is stable and reliable. High stability design maintains stable airflow output even after long working hours. 4. Low Noise and Vibration: The air assist pump is designed to be silent, and both the internal structure and external vibration dampening feet significantly reduce noise or vibration without affecting cutting accuracy, providing a quiet working environment of less than 40 decibels. 5. Easy to Install and Compatible: The engraver air assist pump requires no installation and can be used with the regulator (not included) to adjust the flowing rate within the range, compatible with most laser engravers on the market. Specification: Item Type: Air Assist Pump Material: Aluminum Alloy Power: 16W Air Outlet Nozzle Outer Diameter: Approx. 8mm / 0.3in How to Use: Take out the product, install it and use it. Package List: 1 x Air Assist Pump 1 x Air Outlet Nozzle 1 x Hose 1 x Splitter 1 x Instruction Book

₹6119.00 Out Of Stock

Brass hot end for temperatures up to 420°C. Equipped with a Martensite Steel Nozzle and a hole for a 3mm temperature sensor and a full metal heatbreak.

₹2429.00 MRP : ₹ 3129.0022% off Out Of Stock

Dedicated for: CreatBot F160 / CreatBot F160-PEEK CreatBot F430 CreatBot D600 Pro / CreatBot D600 Pro 2 CreatBot PEEK-300 CreatBot F1000 / CreatBot D1000

₹2499.00 Out Of Stock

The CreatBot Nozzle 0.4mm is a precision-engineered component tailored for high-quality 3D printing. Designed to offer a balance between detail and speed, this nozzle is ideal for a wide range of printing projects, from intricate models to functional parts. Made from durable materials, it provides consistent extrusion and resists wear, even when using abrasive filaments. The 0.4mm diameter allows for fine layer resolution while maintaining a smooth flow, ensuring that prints have excellent surface finish and structural integrity.

₹2999.00 Out Of Stock

PEEK300 GLASS BED