BIBO 2
57,819
Taxes Included | Free Shipping
Full-color touch screen: with no threshold, which is a more friendly and easier operation.WIFI Control: the included networking feature permits you to control the print via a phone or PC.Filament detection: if the filament spool runs out during printing, the machine automatically pauses for you to load in a fresh spool, very useful for big volume object printing.Continue printing after power cut: if you have a power failure, the BIBO will resume printing where it left off once the power comes back on. There’s not a lot of 3D printers that have that particular function. Usually, you would end up with an incomplete project and would have to start again from scratch.
This Product is Out Of Stock......
- Extruder Number: 2
- Frame: 6mm thick aluminum composite panel
- Full-color Touch Screen: Yes
- Laser Engraving: Yes
- WIFI Control: Yes
- Copy Printing: Yes
- Continue Printing After Power Cut: Yes
- Filament Run-out Detection: Yes
- Removable Heated Bed: Yes (already leveled, usually no need to level it again)
- Number of Fan to Cool Plastic extruded: 2
- Printing Mode:USB connect PC or SD card or U disk
- Machine Size:18.4*14*14.7(in)
- Weight: 35.3 pounds Build Size :8.4*7.3*6.3(in) / 214*186*160（mm）
- Printing Layer Resolution: 0.05-0.3mm
- Max. Nozzle Temp.:270℃
- Recommended Software: Repetier-Host, Cura, Simplify3D
- Compatibility: Windows, Mac, Linux
- Filament Type:ABS, PLA, Dissolvable filament (PVA, HIPS), Flexible filament (TPU)
- Filament Diameter 1.75mm
| Technology : | Fused deposition modeling (FDM) |
| Year : | 2019 |
| Assembly : | Partially assembled |
| Mechanical arrangement : | Cartesian XY-head |
| Manufacturer : | Bibo |
| Build volume : | 214 x 186 x 160 mm |
| Feeder system : | Direct drive |
| Print head : | Dual nozzle |
| Nozzle size : | 0.4 mm |
| Max. hot end temperature : | 270 ℃ |
| Max. heated bed temperature : | 100 ℃ |
| Print bed material : | Glass |
| Frame : | Aluminum |
| Bed leveling : | Manual |
| Connectivity : | WiFi, USB |
| Print recovery : | Yes |
| Filament sensor : | Yes |
| Camera : | No |
| Filament diameter : | 1.75 mm |
| Third-party filament : | Yes |
| Filament materials : | Consumer materials (PLA, ABS, PETG, Flexibles) |
| Recommended slicer : | Cura, Simplify3D, Repetier-Host |
| Operating system : | Windows, Mac OSX, Linux |
| File types : | STL, OBJ, AMF |
| Frame dimensions : | 467 x 357 x 374 mm |
| Weight : | 16 kg |
BIBO
3D Printer
Type D
Mayur Pawar
2021-03-09 22:27:06Good Product