₹109551.00 MRP : ₹ 153372.0029% off Out Of Stock

Massive 300×300×300mm Cubic Build Volume Ultra-High Print Speed (1,000 mm/s Maximum) Four Dedicated Filament Tubes with Chroma Kit Pro-Grade Nozzle System (3 Types Included) Klipper Firmware Architecture 5-Inch Touch Panel with 720p Camera

₹34998.00 MRP : ₹ 48997.0029% off Out Of Stock

Compact High-Resolution 8K Printing (22 ?m XY Resolution) 7.1-Inch 8K Mono LCD Screen Affordable High-Resolution Solution Single Linear Rail Design Pre-Calibrated Factory Setup Universal Slicer Compatibility

₹153145.00 MRP : ₹ 214402.0029% off Out Of Stock

Massive 15-Inch 8K Mono LCD Screen Ultra-Large 330×185×300mm Build Volume High-Temperature LCD Technology (HT-LCD) ParaLED Matrix 3.0 Light System 43 ?m XY Resolution Dual Linear Rails with Ball Screw

₹323388.00 MRP : ₹ 452744.0029% off Out Of Stock

₹94397.00 MRP : ₹ 132155.0029% off Out Of Stock

16K Ultra-High Resolution (14×19 ?m) Built-in 30°C Chamber Heater Dual Smart Failure Detection System Assisted Auto-Leveling Technology Aerospace-Grade 6000-Series Aluminum Frame Phrozen GO App Multi-Printer Management

₹34283.00 Out Of Stock

Great Inner Capacity: 17.5 x 14 x 18.5 cm inner capacity, which fits build volume for Phrozen 5.5

₹29383.00 Out Of Stock

As the largest consumer UV curing lamp on the market, Phrozen Cure Luna is extremely affordable and works with speed to cure all your large-scale models. With a capacity of 28 x 28 x 40 cm, this unit uses UV-LEDs and rotates 360 degrees to ensure that your models are cured evenly, regardless of size.

₹149000.00 Out Of Stock

Large prints need large solutions; this is where Phrozen Cure Mega comes in. Without proper curing assistance, large prints can easily fail. Phrozen Cure Mega comes with 40 X 40 X 45cm mega chamber size. With a 405nm powerful UV light strength and a 360-degree rotating stand, Phrozen Cure Mega cures large prints or multiple smaller-sized models in a flash, regardless of size. Don’t let your models fail at this crucial stage. Store your models in the chamber and with a click of a button, your models will be properly cured in an hour or less.

₹7239.00 Out Of Stock

Phrozen’s new Aqua-Gray 4K resin is designed to showcase 3D models in high resolution and works best with the new Sonic Mini 4K 3D Printer. The formula is created to allow every designer to print the exact replica of their designs with the added benefits of no shrinkage and low odor.

₹4999.00 Out Of Stock

Specifically designed for casting, Phrozen Castable Dental & Jewelry Resins burn cleanly to provide reliable casting for all types of 3D printed models, especially 3D printed jewelry, and dental parts. It also provides low-shrinkage, high-precision printing, more consistent results than other castable resins on the market.

₹7239.00 Out Of Stock

Phrozen Aqua-Green is developed for low shrinkage and high precision printing. Its low warpage & dimensional stability are especially good for precise parts.Phrozen Aqua-Green is easy to be printed and post processed due to its low viscosity. Meanwhile its low odor will not make your place smells.Phrozen Aqua-Green is customized for 405nm LCD printer. Cure time per layer: 7 sec on Shuffle & 1.5 sec on Sonic (50µm).

₹4999.00 Out Of Stock

TR250LV High Temp: Explore Possibility for Engineering!Phrozen TR250LV High Temp 3D Printer Resin comes with high thermal resistance, high mechanical strength, and with a certain toughness, making it ideal for making functional 3D printed parts.

₹7239.00 Out Of Stock

Affordable resins are usually brittle and smelly, but that not the case for Phrozen Aqua Resin. With a refined formula, Phrozen team minimized the odor and at the same time designed the resin to be non-brittle.

₹0.00 MRP : ₹ 21989.00100% off Out Of Stock

Phrozen PFA (nFEP) films are specifically designed to be long-lasting and allow users to print out high-quality 3D models multiple times without constantly worrying about changing the film. After printing a model, just simply clean the film and you’ll be ready for your next printing project!

₹4899.00 Out Of Stock

Phrozen’s FEP films are specifically designed to be long-lasting and allow users to print out high-quality 3D models multiple times without constantly worrying about changing the film. After printing a model, just simply clean the film and you’ll be ready for your next printing project!

₹11000.00 Out Of Stock

Made with all-metal CNC and anodization, Phrozen’s Aluminum Resin Vat is durable and comes with a stable structure to ensure the printing process goes as smoothly as possible. The vat is designed to have a sprout, making it extremely convenient for pouring in or changing resin. Pre-installed FEP film allows you to start printing immediately.

₹66000.00 Out Of Stock

Made with all-metal CNC and anodization, Phrozen’s Aluminum Resin Vat is durable and comes with a stable structure to ensure the printing process goes as smoothly as possible. The vat is designed to have a sprout, making it extremely convenient for pouring in or changing resin. Pre-installed FEP film allows you to start printing immediately.