|
Specifications
|
- Length (cm) : 49
- Width (cm) : 51
- Height (cm) : 63
- Volumetric Weight (kg) : 31.49
- Printing Technology : Fused Deposition Modeling (FDM)
- Chassis : Aluminum and Steel
- Outer Frame : Plastic and Glass
- Physical Dimensions : 492 × 514 × 626 mm
- Net Weight : 1.21 kg
- 0 :
- Build Volume (W × D × H) :
- Single Nozzle Printing : 325 × 320 × 325 mm
- Dual Nozzle Printing : 300 × 320 × 320 mm
- Total Volume for Two Nozzles : 350 × 320 × 320 mm
- Toolhead :
- Hotend : All Metal
- Extruder Gear : Hardened Steel
- Nozzle : Tungsten Carbide
- Max Nozzle Temperature : 350 °C
- Included Nozzle Diameter : 0.4 mm
- Supported Nozzle Diameters : 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm
- Filament Cutter : Built-in
- Filament Diameter : 1.75 mm
- Extruder Motor : Bambu Lab High-precision Permanent Magnet Synchronous Motor
- Heatbed :
- Build Plate Material : Flexible Steel Plate
- Included Build Plate : Textured PEI Plate
- Supported Build Plates : Textured PEI Plate, Smooth PEI Plate
- Max Heatbed Temperature : 120 °C
- Speed :
- Max Toolhead Speed : 1000 mm/s
- Max Toolhead Acceleration : 20,000 mm/s²
- Max Hotend Flow : 40 mm³/s (tested with a 250 mm round model, single outer wall, Bambu Lab ABS, 280 °C)
- Chamber Temperature Control :
- Active Chamber Heating : Supported
- Max Chamber Temperature : 65 °C
- Air Purification :
- Pre-filter Grade : G3
- HEPA Filter Grade : H12
- Activated Carbon Filter : Granulated Coconut Shell
- VOC Filtration : Superior
- Particulate Matter Filtration : Supported
- Cooling :
- Part Cooling Fan, Hotend Cooling Fan, Main Control Board Fan, Chamber Exhaust Fan, Chamber Heat Circulation Fan, Auxiliary Part Cooling Fan, Toolhead Enhanced Cooling Fan : All Closed Loop Control
- Supported Filament Types :
- Optimal : PLA, PETG, TPU, PVA, BVOH
- Superior : ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced PLA, PETG, PA, PET, PC, ABS, ASA
- Ideal : PPA-CF/GF, PPS, PPS-CF/GF
- Sensors :
- Live View Camera : Built-in, 1920 × 1080
- Nozzle Camera : Built-in, 1920 × 1080
- Toolhead Camera : Built-in, 1920 × 1080
- Door Sensor : Supported
- Filament Run Out Sensor : Supported
- Filament Tangle Sensor : Supported
- Filament Odometry : Supported
- Power Loss Recovery : Supported
- Electrical Requirements :
- Voltage : DC 24 V, AC 100–240 V, 50/60 Hz
- Max Power : 2200 W @ 220 V / 1320 W @ 110 V
- Working Temperature : 10 °C – 30 °C
- Note : Please purchase the version corresponding to your region’s voltage.
- Electronics :
- Touchscreen : 5-inch, 720 × 1280
- Storage : Built-in 32 GB eMMC and USB port
- Control Interface : Touchscreen, mobile app, PC app
- Motion Controller : Dual-core Cortex-M4 and Single-core Cortex-M7
- Application Processor : Quad-core 1.5 GHz ARM A7
- Neural Processing Unit : 2 TOPS
- Software :
- Slicer : Bambu Studio
- Third-party Slicers : SuperSlicer, PrusaSlicer, Cura and others that export standard G-code (certain advanced features may not be supported)
- Supported Operating Systems : macOS, Windows
- Network Control :
- Ethernet : Available (RJ45, 100 Mbps Full-Duplex)
- Wireless Network : Wi-Fi (IEEE 802.11 a/b/g/n)
- Network Kill Switch : Wi-Fi
- Removable Network Module : Available
- 802.1X Network Access Control : Available
- Operating Frequency : 2412–2472 MHz, 5150–5850 MHz (FCC/CE); 2400–2483.5 MHz, 5150–5850 MHz (SRRC)
- Wi-Fi Transmitter Power (EIRP), 2.4 GHz :
|
|
|
