Bambu Lab H2D Pro AMS Combo 3D Printer
Bambu Lab H2D Pro AMS Combo 3D Printer
Bambu Lab H2D Pro AMS Combo 3D Printer
Bambu Lab H2D Pro AMS Combo 3D Printer
Bambu Lab H2D Pro AMS Combo 3D Printer

Bambu Lab H2D Pro AMS Combo 3D Printer

₹

Bambu Lab H2D Pro AMS Combo 3D Printer
Product Features

• Dual-nozzle FDM printer with up to 350 x 320 x 320 mm build volume

• Active chamber heating up to 65 degree C for engineering materials

• Tungsten carbide nozzle, 350 degree C hotend and 120 degree C heatbed

• 1000 mm/s toolhead speed with 20,000 mm/s square acceleration

• Built-in HEPA H12 and activated carbon air filtration

• Three 1080p cameras for live view, nozzle and toolhead

• Includes AMS 2 Pro and AMS HT for multi-colour, multi-material printing

• Wi-Fi and Ethernet, with touchscreen, mobile app and PC app control

- 100%
₹0.00
MRP :
₹559,998.60
Out Of Stock
Check Delivery & Services

Estimated delivery time      4-5 business days

Free shipping on All orders

Cash on Delivery For orders above ₹1500

EMI Available on all products

Notify me !
Add to wishlist Remove from wishlist Compare Ask a question Share

Guarantee Safe Checkout:

  • card
  • card
  • card
  • card
Bambu Lab H2D Pro AMS Combo 3D Printer
Notify me !
  • Dual-nozzle printing: Two nozzles give a combined print area of 350 × 320 × 320 mm. You can print in two materials or colours in a single job, or use a single nozzle for a larger 325 × 320 × 325 mm volume.
  • Active chamber heating: The chamber heats up to 65 °C, which reduces warping and layer splitting when printing ABS, ASA, PC, PA and other engineering materials.
  • High-speed, high-flow printing: The toolhead reaches 1000 mm/s with 20,000 mm/s² acceleration. The hotend flows up to 40 mm³/s (tested with Bambu Lab ABS at 280 °C), so large prints finish faster without losing quality.
  • Wear-resistant toolhead: The all-metal hotend, tungsten carbide nozzle and hardened steel extruder gear handle abrasive carbon and glass fibre reinforced filaments. A built-in filament cutter supports clean filament changes.
  • Wide nozzle choice: A 0.4 mm nozzle is included, and 0.2, 0.6 and 0.8 mm nozzles are also supported. This lets you trade fine detail against print speed.
  • AMS 2 Pro and AMS HT included: Automatic filament management with RFID identification, sealed storage, active moisture discharge, and real-time temperature and humidity display. The AMS HT heats up to 85 °C and has a rotating drying mode and a bypass outlet for TPE, generic TPU and carbon fibre filaments.
  • Advanced air filtration: The G3 pre-filter, H12 HEPA filter and granulated coconut shell carbon filter capture particulate matter and VOCs. This makes printing cleaner in offices, labs and workshops.
  • Closed-loop cooling: The part cooling fan, auxiliary part cooling fan, hotend fan, toolhead enhanced cooling fan, chamber exhaust fan, chamber heat circulation fan and control board fan are all closed-loop controlled for consistent temperatures.
  • Three built-in cameras: 1920 × 1080 live view, nozzle and toolhead cameras let you monitor prints and check first layers remotely.
  • Smart safety and reliability sensors: Door sensor, filament run-out sensor, filament tangle sensor, filament odometry (with AMS) and power loss recovery help prevent failed prints.
  • Flexible build plate: The flexible steel plate with textured PEI makes part removal easy, and a smooth PEI plate is also supported.
  • Powerful processing: A quad-core 1.5 GHz ARM A7 application processor, a 2 TOPS neural processing unit and a dual motion controller (Cortex-M4 and M7) run the printer smoothly.
  • Connectivity and security: Wi-Fi, 100 Mbps Ethernet, a Wi-Fi network kill switch, a removable network module and 802.1X network access control suit both home and enterprise networks.
  • Software support: Works with Bambu Studio on macOS and Windows, and supports third-party slicers that export standard G-code, such as SuperSlicer, PrusaSlicer and Cura. Some advanced features may not be available in those slicers.
  • Dual-nozzle FDM printer with up to 350 x 320 x 320 mm build volume Active chamber heating up to 65 degree C for engineering materials Tungsten carbide nozzle, 350 degree C hotend and 120 degree C heatbed 1000 mm/s toolhead speed with 20,000 mm/s square acceleration Built-in HEPA H12 and activated carbon air filtration Three 1080p cameras for live view, nozzle and toolhead Includes AMS 2 Pro and AMS HT for multi-colour, multi-material printing Wi-Fi and Ethernet, with touchscreen, mobile app and PC app control.
  • Length (cm) : 49
  • Width (cm) : 51
  • Height (cm) : 63
  • Volumetric Weight (kg) : 31.49
  • Printing Technology : Fused Deposition Modeling (FDM)
  • Chassis : Aluminum and Steel
  • Outer Frame : Plastic and Glass
  • Physical Dimensions : 492 × 514 × 626 mm
  • Net Weight : 1.21 kg
  • 0 :
  • Build Volume (W × D × H) :
  • Single Nozzle Printing : 325 × 320 × 325 mm
  • Dual Nozzle Printing : 300 × 320 × 320 mm
  • Total Volume for Two Nozzles : 350 × 320 × 320 mm
  • Toolhead :
  • Hotend : All Metal
  • Extruder Gear : Hardened Steel
  • Nozzle : Tungsten Carbide
  • Max Nozzle Temperature : 350 °C
  • Included Nozzle Diameter : 0.4 mm
  • Supported Nozzle Diameters : 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm
  • Filament Cutter : Built-in
  • Filament Diameter : 1.75 mm
  • Extruder Motor : Bambu Lab High-precision Permanent Magnet Synchronous Motor
  • Heatbed :
  • Build Plate Material : Flexible Steel Plate
  • Included Build Plate : Textured PEI Plate
  • Supported Build Plates : Textured PEI Plate, Smooth PEI Plate
  • Max Heatbed Temperature : 120 °C
  • Speed :
  • Max Toolhead Speed : 1000 mm/s
  • Max Toolhead Acceleration : 20,000 mm/s²
  • Max Hotend Flow : 40 mm³/s (tested with a 250 mm round model, single outer wall, Bambu Lab ABS, 280 °C)
  • Chamber Temperature Control :
  • Active Chamber Heating : Supported
  • Max Chamber Temperature : 65 °C
  • Air Purification :
  • Pre-filter Grade : G3
  • HEPA Filter Grade : H12
  • Activated Carbon Filter : Granulated Coconut Shell
  • VOC Filtration : Superior
  • Particulate Matter Filtration : Supported
  • Cooling :
  • Part Cooling Fan, Hotend Cooling Fan, Main Control Board Fan, Chamber Exhaust Fan, Chamber Heat Circulation Fan, Auxiliary Part Cooling Fan, Toolhead Enhanced Cooling Fan : All Closed Loop Control
  • Supported Filament Types :
  • Optimal : PLA, PETG, TPU, PVA, BVOH
  • Superior : ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced PLA, PETG, PA, PET, PC, ABS, ASA
  • Ideal : PPA-CF/GF, PPS, PPS-CF/GF
  • Sensors :
  • Live View Camera : Built-in, 1920 × 1080
  • Nozzle Camera : Built-in, 1920 × 1080
  • Toolhead Camera : Built-in, 1920 × 1080
  • Door Sensor : Supported
  • Filament Run Out Sensor : Supported
  • Filament Tangle Sensor : Supported
  • Filament Odometry : Supported
  • Power Loss Recovery : Supported
  • Electrical Requirements :
  • Voltage : DC 24 V, AC 100–240 V, 50/60 Hz
  • Max Power : 2200 W @ 220 V / 1320 W @ 110 V
  • Working Temperature : 10 °C – 30 °C
  • Note : Please purchase the version corresponding to your region’s voltage.
  • Electronics :
  • Touchscreen : 5-inch, 720 × 1280
  • Storage : Built-in 32 GB eMMC and USB port
  • Control Interface : Touchscreen, mobile app, PC app
  • Motion Controller : Dual-core Cortex-M4 and Single-core Cortex-M7
  • Application Processor : Quad-core 1.5 GHz ARM A7
  • Neural Processing Unit : 2 TOPS
  • Software :
  • Slicer : Bambu Studio
  • Third-party Slicers : SuperSlicer, PrusaSlicer, Cura and others that export standard G-code (certain advanced features may not be supported)
  • Supported Operating Systems : macOS, Windows
  • Network Control :
  • Ethernet : Available (RJ45, 100 Mbps Full-Duplex)
  • Wireless Network : Wi-Fi (IEEE 802.11 a/b/g/n)
  • Network Kill Switch : Wi-Fi
  • Removable Network Module : Available
  • 802.1X Network Access Control : Available
  • Operating Frequency : 2412–2472 MHz, 5150–5850 MHz (FCC/CE); 2400–2483.5 MHz, 5150–5850 MHz (SRRC)
  • Wi-Fi Transmitter Power (EIRP), 2.4 GHz :

Unboxing, Warranty & Service Policy

Unboxing Video Requirement

Customers are strongly advised to record a complete and continuous unboxing video immediately upon receiving the product.

Mandatory in case of:

  • Transit damage
  • Missing parts
  • Incorrect product delivery

The unboxing video helps us validate claims and obtain approval from the manufacturer, ensuring faster resolution.

Original Packaging Mandatory

For any under-warranty repair or in-house service, the product must be shipped only in its original packaging.

Includes all foam, supports, and protective materials provided at delivery.

Warranty Limitation

Without original packaging, the following may apply:

  • Warranty may be void
  • Transit damage not covered

3Idea Technology Ltd. is not responsible for transit-related damages in these cases.

Transportation Responsibility

The customer is solely responsible for ensuring the product is properly packed and safely shipped.

Follow manufacturer guidelines to prevent damage during transit.

Important Note:

Failure to comply with the above guidelines may result in rejection of warranty claims or chargeable repairs. Please ensure all safety protocols are followed.

Ask a Question
Your name*
Your phone number
Your email*
Message*
Provide Contact for Notification
Your name*
Your phone number
Your email*
Share
Copy