Sensinova Nano 16 Motion Sensor

₹2449.00

Sensinova Nano 16 Motion Sensor
Product Features

The NANO 16 Motion Sensor is an active motion detector, emitting high frequency electro-magnetic waves, and receives their echo. A microprocessor then triggers the switch light ON command. Detection is possible through doors, panes of glass or thin walls in most applicants. This ia an ultra-reliable sensor, especially as there are no gaps in the detection zone.

₹2,449.00
Out Of Stock
Check Delivery & Services

Estimated delivery time      4-5 business days

Free shipping on All orders

Cash on Delivery For orders above ₹1500

Guarantee Safe Checkout:

  • card
  • card
  • card
  • card
Sensinova Nano 16 Motion Sensor
  • Always isolate mains power prior to installation.
  • Remove cover by turning anti-clockwise and remove the 2 screws.
  • Use the base to mark the drill holes on the mounting surface.
  • Drill holes and insert wall plugs if required.
  • Feed power cable and load cable through base holes and securely affix base.
  • Connect the power wire and the load wire to the connection terminal according to the electrical connection.
  • Replace & secure base cover, caliborate and replace front cover.
  • The NANO 16 Motion Sensor is an active motion detector, emitting high frequency electro-magnetic waves, and receives their echo.
  • A microprocessor then triggers the switch light ON command.
  • Detection is possible through doors, panes of glass or thin walls in most applicants.
  • This ia an ultra-reliable sensor, especially as there are no gaps in the detection zone.
  • Power Source : 220V - 240V AC
  • Power Frequency : 50/60HZ
  • HF System : <0.2mW
  • Time Delay : Min 10 seconds / Max 12 Minutes
  • Rated Load : 800W (Incandescent) / 300W (LED Load)
  • Detection Distance : 2-16m diameter (Adjustable)
  • Detection Range : 360
  • Manual Override : No
  • Weatherproof Rating : IP20
  • Warranty : 3 Years
  • No. of Wires : 4 Wire.

Unboxing, Warranty & Service Policy

Unboxing Video Requirement

Customers are strongly advised to record a complete and continuous unboxing video immediately upon receiving the product.

Mandatory in case of:

  • Transit damage
  • Missing parts
  • Incorrect product delivery

The unboxing video helps us validate claims and obtain approval from the manufacturer, ensuring faster resolution.

Original Packaging Mandatory

For any under-warranty repair or in-house service, the product must be shipped only in its original packaging.

Includes all foam, supports, and protective materials provided at delivery.

Warranty Limitation

Without original packaging, the following may apply:

  • Warranty may be void
  • Transit damage not covered

3Idea Technology Ltd. is not responsible for transit-related damages in these cases.

Transportation Responsibility

The customer is solely responsible for ensuring the product is properly packed and safely shipped.

Follow manufacturer guidelines to prevent damage during transit.

Important Note:

Failure to comply with the above guidelines may result in rejection of warranty claims or chargeable repairs. Please ensure all safety protocols are followed.