₹2219.00 MRP : ₹ 5218.0057% off

Metal Build Plate for Photon M3, LCD Resin 3D Printer Part Accessories Brushed Printing Platform

₹2069.00 MRP : ₹ 3103.0033% off

₹1189.00 MRP : ₹ 2788.0057% off

Protect your Photon M3 MAX LCD Resin Printer with this 13.6 inch Screen Protector Anti-scratch Film. This five-piece set is designed to keep your LCD screen free from scratches and other damage. The film is easy to apply and remove, and is designed to provide maximum protection while still allowing you to clearly see the screen. Keep your printer looking like new with this Screen Protector Film.

₹669.00 MRP : ₹ 1933.0065% off

Suitable for CR-6 SE / CR-6 SE Max 3D Printers.

₹2599.00 MRP : ₹ 4677.0044% off

The release film comes with a ring, No need to disassemble the ring and cut the FEP film. The entire installation process only takes 3 minutes. and there is an easy-to-follow tutorial on the package that guiding you to better replace the ACF film

₹5709.00 MRP : ₹ 11158.0049% off

XYZ Metallic Print Platform compatible with XYZ Nobel Superfine.

₹1079.00 MRP : ₹ 3133.0066% off

Smooth Filament Feeding Stable Operation Precise Temperature Control Heat Resistant Bruss Nozzle New Upgrade Throat Tube Optimized Nozzle Full Hotend Assembly Fan Shroud 2x Mounting Screws and washers

₹3029.00 MRP : ₹ 7108.0057% off

Flsun S1 Effector Adapter Board

₹899.00 MRP : ₹ 2608.0066% off

For Creality Ender-3, Ender 3 Pro & Ender-3 V2

₹3959.00 MRP : ₹ 7723.0049% off

Hotbed Kit_24V_270W_235×235×3mm Compatible with Ender-3 S1

₹6129.00 MRP : ₹ 11968.0049% off

The energy storage board provides backup power to cope with power interruptions or instability.

₹999.00 MRP : ₹ 1498.0033% off

₹679.00 MRP : ₹ 1948.0065% off

Stable and smooth data transmission among the Controller and Modules. Can only be plugged into the right position. Excellent wear resistance prolongs the cable’s service life. Easy to organize with Cable Ties or Cable Clips, and so keep you tangle free Compatible with Snapmaker A250

₹3329.00 MRP : ₹ 6478.0049% off

₹10949.00 MRP : ₹ 20818.0047% off

The Flashforge Creator 4 Right Nozzle Assembly-HS with a 0.4mm hardened steel nozzle is a specialized component designed to enhance the 3D printing capabilities of the Flashforge Creator 4 printer. This assembly is tailored for the right extruder and is optimized for high-temperature printing, supporting a maximum temperature of up to 360°C.

₹1019.00 MRP : ₹ 1848.0045% off

Ender 3 Upgraded Frosted Cold Printing Platform Kit (235*235mm) Print without Heating the Hotbed. Energy-saving and environmentally friendly, also reduces the risk of burns. A distinctive frosted feel is given by the special rough frosted surface of the plate. Higher adhesion of models is not easy to warp while firmly locking creativity during the printing process. Compatible modes : Ender 3/ Ender 3 Pro/ Ender 3 S1/ Ender 3 V2/ Ender 5/ Ender 5S/ Ender 5 Pro

₹1329.00 MRP : ₹ 3868.0066% off

For the Anycubic Kobra series 3D printers, including models like the Kobra 2 Neo, the power supply requirements are crucial to ensure reliable operation. Typically, 3D printers in this series require a stable and sufficient power supply to operate their various components, including the motherboard, stepper motors, heating elements, and possibly a heated bed.

₹4109.00 MRP : ₹ 8038.0049% off

3D Pad Mini 4.3 Inches Display Screen Support 11 Languages for 32bit Motherboard Ender-3/Ender-3 V2/Ender-3 Pro Printer. With 3D Digital Spool-C, it can real-time monitor the filament weight, calculate the amount of filament needed to print the model, and de- termine whether the remaining filament is enough for model printing

₹1799.00 MRP : ₹ 2698.0033% off

Anycubic Z Motor for Kobra 2 Neo 3D Printer

₹1199.00 MRP : ₹ 1798.0033% off

₹1239.00 MRP : ₹ 3643.0066% off

Flex Ribbon Cables , Ribbon Flex Extension Cable. This ribbon flat cable is specially designed for the flexible cable .The cable usually consists of a flat flexible plastic film base, and multiple metal conductors are glued on a surface.

₹1019.00 MRP : ₹ 2968.0066% off

Printer HotEnd Kit, Easily Use High-Temperature Resistance 3D Printer Parts with 0.4mm Nozzle for Printer Assembly Bullet Design High Printing Accuracy Stable Operation No Clogging and No Leakage

₹669.00 MRP : ₹ 1933.0065% off

This X axis motor mounting compatible with Anet A8 & Open Source FDM 3D Printers

₹2109.00 MRP : ₹ 4933.0057% off

The CNC Bits - 4mm Shank set includes three high-quality bits designed for precision machining, milling, and engraving tasks. Each bit features a 4mm shank, ensuring compatibility with a wide range of CNC machines, and they are made from durable materials that provide excellent cutting performance and long-lasting wear resistance. This set comes with a spindle collet, enabling secure and stable attachment to the machine spindle, enhancing precision and reducing vibration during operation. Ideal for wood, plastic, and soft metals, this bit set is perfect for detailed and efficient CNC work.

₹1979.00 MRP : ₹ 4633.0057% off

₹1039.00 MRP : ₹ 3028.0066% off

Stock Replacement Heatsink for the CR-10S Pro V1/V2 and CR-10 MAX Hot Ends.

₹519.00 MRP : ₹ 1483.0065% off

The Creality Ender 3 S1 Hotend Accessory Kit is designed to enhance and maintain the performance of the Ender 3 S1 3D printer. The kit typically includes a range of components necessary for the hotend, which is a critical part of the 3D printer responsible for melting and extruding filament.

₹1589.00 MRP : ₹ 2869.0045% off

Creality PTFE Tube has high abrasion resistance, chemical resistance, and high melting point. White Teflon Tube Kit

₹5159.00 MRP : ₹ 9535.0046% off

Compatible with Anycubic Photon Mono M7/M7 Pro LCD Resin 3D Printers. Made of high-quality material, durable and easy to replace. Resin Tank with FEP film Pre-Installed. There is a maximum scale on the inner wall of the resin tank to avoid adding too much resin and causing overflow when printing.

₹1829.00 MRP : ₹ 4273.0057% off

Creality Hotend Adapter Plate For Ender-3 V3 / Ender-3 V3 Plus.

₹3839.00 MRP : ₹ 7498.0049% off

PEI printing plate kit PEI platform & Soft magnetic sticker. Gold frosted surface - Flame retardant and heat resistance. PEI spring plate - High strength and wear resistance. Soft magnetic sticker - Strong magnetic force and simple removal. Compatible with Ender-5 Plus

₹2829.00 MRP : ₹ 5143.0045% off

Creality K1 Max Ceramic Heater Block Kit, Supports 300 and 600 mm/s High-Speed Printing. All-Metal Hotend Compatible for Creality K1/ K1 Max 3D Printers

₹679.00 MRP : ₹ 1963.0065% off

24V-4020 Fan made of special and premium materials. It is high temperature resistant and extremely durable. Excellent for cooling heat sinks on hot ends, prints, or other cooling needs. It is made of high-quality PBT + 30percent glass line + VO and Bearing with high precision, providing long life and low noise. It can be taken in used to handle the temperature cooling 75degreeC. Its Working temperature is 40degreeC with a continuous working 24-hour capacity.

₹2479.00 MRP : ₹ 5818.0057% off

Generic Brass Nozzle Kit High Hardness 300-degree Temperature Resistance Smooth Inner Wall Applicable to Most FDM. Compatible Materials: PLA/ABS/PETG/TPE/TPU.

₹309.00 MRP : ₹ 868.0064% off

Extruder Extrusion pin for Creality Ender-3/ Ender-3 Pro

₹299.00 MRP : ₹ 838.0064% off

Thermistor replacement is carried out using fasteners with shrink tubing, so there is no need to replace the entire cable. The installation of the thermistor is therefore uncomplicated and very simple. together with the original connection kit The temperature interface is from -30° C to 300 ° C.

₹1999.00 MRP : ₹ 4708.0058% off

LED Light Bar Kit is energy and power-saving. Good chip and luminous efficiency, low light wane, long service life Uniform luminance, soft light. Creates a comfortable and even healthy spatial light sense.

₹7769.00 MRP : ₹ 15193.0049% off

FLSUN V400 3D Printer Hotend Nozzle Kit with Silicone Sleeve Extruder Parts Print Head Brass Heat Block Throat Copper Plated

₹2169.00 MRP : ₹ 5083.0057% off

The release ability of high lubricating material nFEP is 25% higher than that of FEP, the printing success rate is higher, the printing speed is faster, the number of layers is less, and the model is more accurate The UV transmittance is as high as 95%, the resin curing is stable, the curing time is short, the model printing accuracy is high, and the speed is fast.

₹13149.00 MRP : ₹ 25033.0047% off

CreatBot F430 Extuder cable

₹4319.00 MRP : ₹ 8428.0049% off

Sermoon D1 Mainboard_V4.3.1_32-bit_TMC2208_STM32 A new definition of the silent motherboard. It has effective noise reduction & high performance with low power consumption. The product is a proprietary Creality design, adapted to work with the Sermoon-D1.

₹1889.00 MRP : ₹ 3403.0044% off

Power adapter photon mono 2

₹10299.00 MRP : ₹ 19573.0047% off

Creality CR-6 SE Gantry Frame Strong and sturdy design Lightweight aluminum material

₹629.00 MRP : ₹ 1828.0066% off

The belt is stable during the transmission movement and will not vibrate and slip greatly, ensuring precise movement with low noise. It is made of high-quality leather material, is more wear-resistant, and ensures excellent transmission performance for long-term work.

₹2109.00 MRP : ₹ 3808.0045% off

Creality K1 Smooth PEI Build Plate Kit, Flexible Spring Steel Platform with Smooth PEI Surface and Magnetic Base Sheet Kit for K1 Excellent Adhesion High Strength and Wear Resistance High Flatness Easy Model Removal

₹6279.00 MRP : ₹ 12268.0049% off

Aluminum hot end for temperatures up to 260°C. Equipped with a brass nozzle and a hole for a 3mm temperature sensor and a PTFE heatbreak.

₹219.00 MRP : ₹ 432.0049% off

Pulley / V slot roller wheel for Creality 3D Printers. Easy to use and easy to install, with small size, easy to carry and store, with good performance. This product is compact designed and durable accessories, suitable for 3D printers. Using high-quality materials, strong and durable, has a long service life. With great workmanship, can perfect replacement for the old one. Strict quality control and high safety factors can be used with peace of mind. Number of items ?1pcs

₹1799.00 MRP : ₹ 3267.0045% off

Extruder Standard Heater Block Kit High-Temperature 260°C Titanium Heat Break. Customized for FDM printers equipped with Sprite Extruder

₹2729.00 MRP : ₹ 6418.0057% off

Switching Power SuppIy for Creality Ender-3 V3 SE 3D Printer, Ender-3 V3 KE 3D Printer, Ender-3 V3 3D Printer, Ender-3 V3 3D Printer

₹3589.00 MRP : ₹ 6973.0049% off

Creality, known for its 3D printers, has also ventured into the realm of electric screwdrivers. Their cordless electric screwdriver combines convenience with functionality, offering users a tool suitable for various tasks such as assembling furniture, electronics, or DIY projects. It likely features a rechargeable battery for portability and may come with interchangeable bits to accommodate different screw types and sizes. This type of tool typically enhances efficiency and reduces fatigue during repetitive tasks compared to manual screwdrivers.

₹5039.00 MRP : ₹ 9853.0049% off

This is a 4 m long device cable for 3D scanners from 3DMakerpro. Make 3D scanning easier with a longer device cable for the 3DMakerPro Mole 3D Scanner

₹769.00 MRP : ₹ 1153.0033% off

₹4639.00 MRP : ₹ 9058.0049% off

The Creality CR-10 is a popular desktop 3D printer known for its large build volume and reliability. The heated bed is a crucial component of this printer, providing several benefits for successful 3D printing The heated bed of the Creality CR-10 enhances the printing experience by facilitating the successful creation of large, high-quality 3D prints with a variety of filament materials.

₹26509.00 MRP : ₹ 48973.0046% off

Fits for: Creator 3 Pro **NOT compatible with Creator 3**

₹669.00 MRP : ₹ 1933.0065% off

This Limit Switch is compatible with Anet A8 And Open Source FDM 3D Printers.

₹7829.00 MRP : ₹ 15298.0049% off

The 0.6mm nozzle size is perfect for a variety of projects, offering a balance between speed and detail. With its durable construction, this nozzle assembly ensures long-lasting performance and reduces the risk of clogs. Enhance your printing experience and achieve stunning prints with ease. Upgrade to the Standard 0.6mm Nozzle Assembly for your Creator 3 Pro and unlock a new level of printing possibilities.

₹2069.00 MRP : ₹ 4843.0057% off

The hotend is equipped with a high-power heating element that ensures rapid heating and stable temperature control. This allows for efficient melting of filament and consistent extrusion. t typically supports a wide temperature range, often up to 260-280°C, making it compatible with a variety of filaments including PLA, ABS, PETG, TPU, and more advanced materials.

₹839.00 MRP : ₹ 2428.0065% off

The effector fan?2515? is located inside the effector and is used to cool and reduce the temperature of the throat to prevent the consumables from softening or clogging during the melting process of the throat. The fan automatically turns on when heating starts and stops when the temperature drops below 50°C.

₹3839.00 MRP : ₹ 7498.0049% off

LCD Display Screen Controller Module LCD Screen with Cable for Ender-3/Ender-3s/Ender-3 Pro 3D Printer Accessories Parts

₹189.00 MRP : ₹ 508.0063% off

Snapmaker A350 steel sealing strip